3 Pin Locking Connector Set (CEL 1155)

Locking Connectors are ideal replacements for connectors that are constantly being plugged and unplugged – such as when removing a wing on your model.

1. Simply cut the ends from your receiver extension(s) and your aileron servo(s).
2. Crimp the pins to your wires with a crimping tool (CEL1179).
3. Snap the pins into the plastic housings of the Locking Connectors.

You now have a Locking Connector in the middle of your extension. Locking Connectors are sold in sets (1 male and 1 female with the appropriate pins). The pins will handle 26-22awg wire.